The protective-decorative coatings on concrete products, obtained by the method of plasma treatment
University of Aden Journal of Natural and Applied Sciences,
Vol. 19 No. 1 (2015),
30-04-2015
Page 163-168
DOI:
https://doi.org/10.47372/uajnas.2015.n1.a14
Abstract
The article deals with the peculiarities of producing the protective-decorative coatings on concrete products by means of fusing the face surface with plasma torch. The concrete products with protective-decorative coatings, obtained by means of plasma spraying, have the high aesthetic, performance and application properties. There was designed an efficient formula of the intermediate layer, preventing dehydration of the concrete face surface during the plasma fusing. The intermediate layer includes chamotte with the strictly defined grain size composition and white portland cement. There were researched such basic functional characteristics of protective-decorative coatings, as density of the coating, frost-resistance, porosity, micro hardness, acid-resistance and alkali-resistance.
Keywords:
-
concrete products, protective-decorative coatings, glazing, bond strength, plasma treatment
How to Cite
Bondarenko, N. I., Al-azab, T. S., Bessmertnyi, V. S., Ilyina, I. A., & Mohammed, Y. M. Y. (2015). The protective-decorative coatings on concrete products, obtained by the method of plasma treatment. University of Aden Journal of Natural and Applied Sciences, 19(1), 163–168. https://doi.org/10.47372/uajnas.2015.n1.a14
- Abstract Viewed: 62 times
- Pdf Downloaded: 30 times